Ferrosilicon Production

Ferrosilicon Production

Ferrosilicon chemical composition: Si Fe Al Ca
72#-80# Ferrosilicon melting point: 1290℃-1360℃
75#Ferrosilicon melting point: 1300℃
Send Inquiry
Product Introduction

Products Description

 

Ferrosilicon production requires professional equipment and production personnel to produce ferrosilicon products that meet the requirements through relevant process methods. At present, the main equipment used are electric arc furnace, smelting furnace, converter, continuous casting machine and so on. Among them, the electric arc furnace in the heating process to maintain a large number of high-energy chemical reaction, resulting in heat and reactant constituent vapours and unreacted smelting material fusion into the intended alloy components. The role of smelting furnace, converter, continuous casting machine and other equipment is to melt the good alloy refining, overcurrent and other measures to maximise the quality of the alloy.

 

Our Factory

image003
 
image005
 
图像005(001)
 

Ferrosilicon production method

Ironmaking

Ferrosilicon production by the ironmaking method utilises the reducing conditions in the blast furnace, where quartz and manganese ore are added to the furnace in a reduction reaction to produce ferrosilicon. This process is suitable for large steel mills and can be used directly in the steelmaking process.

Electric Furnace Process

The production of ferrosilicon by the electric furnace method refers to the use of electricity and electrodes, in the process of melting electrodes, silica and carbon and other raw materials will be added to the electric furnace to carry out the reduction reaction, and the ferrosilicon will be obtained after the reaction is completed. This process is suitable for small or medium-sized steel mills, and its production cost is relatively low.

Hot spot method

The hot spot method is a process to produce ferrosilicon by using waste heat to heat silica and iron, and then adding them to the storage tank to carry out the reduction reaction, so as to obtain ferrosilicon. This process is suitable for small or medium-sized steel mills, and its production cost is relatively low.

Oxide Slag Reduction

Oxide slag reduction is a process to produce ferrosilicon by reducing silica and ferric iron with oxides to obtain ferrosilicon. This process is often used to produce high purity ferrosilicon because of its high efficiency in reducing silica and iron.

Corporate Philosophy

图像003(001)

why choose our products

 

At present, the company is in good operating condition, with a complete organizational structure, scientific management system, clear business process, serving many steel mills, foundries, wind power smelters. The company adhering to the quality first, quality first purpose of stable development, and continue to explore overseas markets, and strive to make the company's products to serve the two domestic and international markets, with the real quality products and good reputation, in the fierce market competition to win a place, and the majority of customers hand in hand to create a better tomorrow!

Send Inquiry

whatsapp

Phone

E-mail

Inquiry