Aluminium Conductor Steel Reinforced
Products Description
Aluminium Conductor Steel Reinforced (ACSR) is a type of wire used in power transmission lines, which consists of aluminium conductors and a certain number of steel cores. The aluminum conductor provides electrical conductivity, while the steel core enhances the strength and corrosion resistance of the ACSR wire. The advantage of ACSR line is that it has good electrical conductivity and high mechanical strength, can withstand the impact of bad weather such as wind, rain, snow, and is suitable for long-distance high-voltage transmission lines. ACSR line has been widely used in power transmission and distribution field because of its high cost performance.
other details

1. Power transmission and distribution: ACSR lines are mainly used in transmission lines, including overhead transmission lines, medium-voltage lines, low-voltage lines and underground cables, which can transmit high-voltage and high-current power signals.
2. Railway field: The high strength and corrosion resistance of ACSR line make it the main choice of railway electrified traction line, and it is widely used in high-speed railway and urban rail transit.
3. Communication field: ACSR line can be used for cable lines of communication buildings such as transmission towers and relay stations and regional radio and television transmission lines.

1. Excessive resistance: If the ACSR line is improperly connected or the line insulation is damaged, the resistance will increase, which will reduce the line conductivity and affect power transmission.
2. Corrosion and aging: Long-term use of ACSR lines will be affected by the natural environment and external forces, resulting in corrosion, aging and fatigue fracture problems on the surface, reducing the service life of the line.
3. Steel core fracture: If the steel core of the ACSR line is broken, the mechanical strength of the line will be reduced, which will affect the safe operation of the line.
Products parameters
| property | value |
| Structure | center:steel wire 1/2.89Nos./mm Layer 1: Steel wire 6/2.89 Nos./mm Layer 2: Aluminum wire 10/3.72 Nos./mmLayer 3: Auminum wire 16/3.72 Nos./m |
| Stranding direction of outer layer | Right-hand |
| Conductor diameter | 23.55 mm |
| Cross section | 328.50 mm2 |
| Conductor weight | 1138.6 kg/km |
| Rated tensile strength | 100.53 kN |
| Modulus of Elasticity | 73.9 GPa |
Product Picture


Our factory

workshop

workshop

workshop

workshop
Previous
Silica PowderYou Might Also Like
Send Inquiry










