Silicon Carbide Also Known As "carborundum"

Silicon Carbide Also Known As "carborundum"

Carborundum, also known as silicon carbide (SiC), is made of quartz sand, petroleum coke (or coal coke), wood chips (salt is needed to produce green silicon carbide) and other raw materials through high temperature smelting resistance furnace. Silicon carbide also exists in nature as a rare mineral, moissanite. Silicon carbide is also known as carbonite. In the contemporary C, N, B and other non-oxide high-tech refractory raw materials, silicon carbide is the most widely used, the most economical one, can be called gold steel sand or refractory sand. At present, China's industrial production of silicon carbide is divided into black silicon carbide and green silicon carbide two kinds, are hexagonal crystals, the specific gravity of 3.20~3.25, microhardness of 2840~3320kg/mm2.
Send Inquiry
Product Introduction
Products Description

Silicon carbide has two commonly used basic varieties of black silicon carbide and green silicon carbide, both belonging to α-SiC. ① Black silicon carbide contains about 95% SiC, its toughness is higher than green silicon carbide, mostly used for processing low tensile strength materials, such as glass, ceramics, stone, refractory materials, cast iron and non-ferrous metals. Green silicon carbide contains more than 97% SiC, self-sharpening is good, mostly used for processing cemented carbide, titanium alloy and optical glass, but also used for honing cylinder liner and fine grinding high-speed steel tools. In addition, there is cubic silicon carbide, which is a special process of yellow green crystal, used to make abrade for bearing superfinishing, can make the surface roughness from Ra32~0.16 microns a processing to Ra0.04~0.02 microns.

intro
t01d6be3f79f3ff331a

►Material properties of silicon carbide

Silicon carbide due to stable chemical properties, high thermal conductivity, small thermal expansion coefficient, good wear resistance, in addition to abrasive, there are many other uses, such as: with a special process to the silicon carbide powder coated on the inner wall of the turbine impeller or cylinder body, can improve its wear resistance and extend the service life 1~2 times; Used to make high-grade refractory material, heat resistance, small size, light weight and high strength, good energy saving effect. Low-grade silicon carbide (containing about 85% SiC) is an excellent deoxidizer, which can speed up steelmaking, facilitate control of chemical composition, and improve the quality of steel. In addition, silicon carbide is also widely used in the production of electric heating element silicon carbon rod.

 

t0102000ea76a5b5b57

►Material structure of silicon carbide

Pure silicon carbide is a colorless transparent crystal. Industrial silicon carbide is light yellow, green, blue and even black because of the type and content of impurities contained, and the transparency varies with its purity. The silicon carbide crystal structure is divided into hexagonal or rhombohedral α-SiC and cubic β-SiC(called cubic silicon carbide). α-SiC forms many different variants due to the different stacking sequences of carbon and silicon atoms in its crystal structure, and more than 70 varieties have been found. β-SiC transforms into α-SiC at 2100℃ or above. The industrial process of silicon carbide is refined with high-quality quartz sand and petroleum coke in a resistance furnace. The refined silicon carbide blocks are broken, acid-alkali washing, magnetic separation and screening or water separation to make various particle size products.

 

 

 

 


Product Picture

38b6ccfe36333f3ab20b1e77870985f

8491fa67068c325ab6c6c7cec3efe421

Our factory

 

5ed1ffd28f7fc396ca0901bf1594d11

workshop

6ce4e047c04ad9c137439ecb8194495

workshop

40dcff8450452e1d069a1f8bc8e4cff

workshop

b6837746f2c202f601b9988cb125685

workshop

 

 

Send Inquiry

whatsapp

Phone

E-mail

Inquiry