Oct 13, 2022 Leave a message

The proportion of ferrosilicon production

Speaking of ferrosilicon, I believe that many friends are familiar with it. There are many applications of ferrosilicon in metallurgy. At the same time, in the economic field, ferrosilicon is also a kind of futures, and its price fluctuations also have a certain impact on the economy. As a ferrosilicon manufacturer, what we call ferrosilicon is naturally used in metallurgy. The production of ferrosilicon is not so simple, and there are many things to pay attention to. Let's take a look at how to feed ferrosilicon during production.

Each batch of materials must be mixed evenly before being added to the furnace, and partial feeding is not allowed. As we all know, the ratio of each batch of materials is calculated according to the chemical reaction principle of ferrosilicon smelting and the composition of the raw materials used, combined with the actual situation. Therefore, the composition of each batch of material added to the furnace must conform to the proportion of the batch. Evenly mixing the charge is an important operating condition to ensure the normal reaction in the furnace.

If the charge is not uniformly mixed or randomly added to the furnace, this is commonly referred to as "partial charging", and the result is excess silica or coke in a local area of the furnace, both of which are not conducive to The reaction in the furnace goes on smoothly, but the condition of the furnace deteriorates. It can be seen that it is very important to mix the charge evenly.

Furnace charges should be continuously added to the furnace in small batches. In this way, it is not only easy to control the height of the charge surface, but also can make the composition and distribution of the charged charge more uniform.

The height of the material surface must be properly controlled. If the height of the material level is too high, the electrode will rise, and if the material level is too low, the material will easily collapse. Neither of them can make full use of heat, which will have an adverse effect on the furnace condition. Proper control of the height of the material surface allows the electrodes to be inserted deeper into the furnace material, thereby increasing the furnace temperature and expanding the crucible, so that the furnace material can be fully preheated and the reaction in the furnace is accelerated.

Every link of ferrosilicon production is very critical, from the selection of production raw materials to the way of adding materials will affect the quality of ferrosilicon. Through the above sharing, we can see the impact of partial feeding in the production process of ferrosilicon, which will not only affect the furnace condition, but also directly affect the quality of ferrosilicon. Therefore, every link of ferrosilicon production should be taken seriously.


Send Inquiry

whatsapp

Phone

E-mail

Inquiry