May 10, 2025 Leave a message

Do you understand the production process of ferromanganese?

Ferromanganese is an important alloy material, widely used in steel, foundry and other industrial fields. So, how is ferromanganese produced? The production process of ferromanganese mainly goes through the following steps:

 

Step 1

Preparation of raw materials
The raw materials needed to make ferromanganese are mainly manganese-rich ores, such as soft manganese ore and hard manganese ore. The selected ores will pass through crushing, grinding, magnetic separation, flotation and other processes to make these ores meet the smelting requirements. Coke is used as a reducing agent to provide heat for the reaction. In addition, workers need to prepare other raw materials such as solvents like lime and dolomite. It serves to regulate the alkalinity of the slag so that the slag has good fluidity and stability.

 
Step 2

Batching
Manganese ore, coke and flux are batched in a certain proportion according to the variety and quality of ferromanganese to be produced. Precise measuring equipment is used to ensure that the product meets the requirements.

 
Step 3

Smelting
Electric furnace smelting: the batch is added to an electric furnace, which generates a high-temperature arc through electrodes to heat the charge to a high temperature. Under the high temperature, the manganese oxides in the manganese ore are reduced by the coke to produce manganese-iron alloy.
Blast Furnace Smelting: In some small scale production, blast furnace is also used for ferromanganese production. After the ingredients are added to the blast furnace, the coke is burnt by blowing hot air to produce high temperature and reducing gas, which realises the reduction of manganese ore and the smelting of ferromanganese.

 
Step 4

Refining
The ferromanganese alloy obtained from melting may contain some impurities, such as silicon, phosphorus, sulphur, etc., which need to be refined to further improve the purity and quality of the alloy. The refining methods usually include oxygen blowing refining, refining outside the furnace and so on.

 
Step 5

Casting and moulding
The refined ferromanganese alloy liquid is poured into specific moulds for casting and moulding to make the required lump or ingot products. During the casting process, attention should be paid to controlling the cooling rate to avoid cracks, shrinkage holes and other defects in the alloy.

 
Step 6

Inspection and Packaging
The quality inspection of the produced ferromanganese products is carried out, including chemical composition analysis and physical property test. Packaging of qualified ferromanganese products, usually in sealed packages, to prevent the products from moisture and oxidation during storage and transport.

 

 

Dadao is a professional ferroalloy manufacturer with a wide range of products, if you want to know more product information and price, please send email to wangwei@dedaoferrosilicon.com

 

Contact now

 

Send Inquiry

whatsapp

Phone

E-mail

Inquiry