
Lightly Burn Magnesium Balls
Products Description
What is light burnt magnesium: light burnt magnesium and contains three kinds of (colloquical) substances: under-burnt products, over-burnt products, active magnesium oxide, 1: the so-called under-burnt products is part of the magnesium carbonate that does not form magnesium oxide, (control the condensation speed of magnesite products mainly depends on the number of under-burnt products;) If there are more underburned products, the burning vector will be high, and the condensation rate of the magnesium products made is particularly fast, which will cause the magnesium products to burst, deformation and so on. 2: The so-called burnt product is burnt magnesium oxide, (the longer the burnt magnesium oxide content is higher, suitable for feed, refractory and other industries) if the burnt product is more, and magnesium chloride to form magnesium oxychloride cement is not easy to set, that is, people often say do not reflect, do not condense. 3: The last one is active magnesium oxide (the best part of magnesium oxide) to do building materials industry is mainly required active magnesium oxide content, if the active magnesium oxide content is not enough, Can not fully reflect the chloride ions in magnesium chloride magnesite products will appear after forming the phenomenon of anti-alkali and anti-halogen, and finally analyze, if magnesite products appear too fast coagulation (resulting in deformation, burst), too slow (non-coagulation), return alkali, return halogen and other conditions may have a direct relationship with magnesium oxide,

►Light burned magnesium ball is mainly used for what, where need to use?
For steel mills. The light burned magnesium ball is mainly used as the regulator of the slag composition of the converter slag splashing furnace. Because slag splashing furnace protection requires slag to have appropriate viscosity and refractoriness, reasonable slag composition is the key to implement slag splashing furnace protection. General slag can not be directly splashed furnace protection, need to add a certain amount of magnesium oxide ball to adjust, while replacing the use of dolomite, reduce the amount of slag, improve the content of MgO in slag. Since MgO is a high melting point mineral, the melting point is 2800℃, the increase of MgO content in the slag makes the slag viscosity become larger, the fire resistance is improved, the slag is more easily combined with the furnace lining, the formation of an effective slag protection layer on the furnace lining, thus improving the life of the furnace lining and reducing consumption.

►Content standard for light burned magnesium balls
MgO≥60% SiO2≤5% Al2O3≤35% hydration≤3%
Product Picture


Our factory

workshop

workshop

workshop

workshop
Previous
Silicon IronNext
Silicon DioxideYou Might Also Like
Send Inquiry







