Ladle Cover Agent

Ladle Cover Agent

Product Product Overview Definition: Briefly describe the product type (e.g., alkaline/neutral covering agent, carbonized rice husk-based, etc.) and its application (e.g., ladle/intermediate ladle, etc.). Core functions: Insulation, air isolation, and impurity adsorption, etc. Application...
Send Inquiry
Product Introduction
Product
 

 

Product Overview

Definition: Briefly describe the product type (e.g., alkaline/neutral covering agent, carbonized rice husk-based, etc.) and its application (e.g., ladle/intermediate ladle, etc.).
Core functions: Insulation, air isolation, and impurity adsorption, etc.
Application scenarios: Electric arc furnaces, refining furnaces, continuous casting processes, or for special steel grades (e.g., high-aluminum steel, stainless steel).

Technical advantages

Performance parameters: thermal conductivity (e.g., ≤0.5 W/m·K), melting point range (e.g., 1300–1500°C), spreadability, etc.
Comparison with competing products: highlight differences (e.g., fluorine-free and environmentally friendly, low burn loss rate, reduced crusting, etc.).
Mechanism explanation: for example, "achieves long-term heat insulation by forming a three-layer structure (slag layer-melting layer-sintering layer)."

Application results

Quantitative indicators: such as "reducing temperature drop by 1.5-3°C/min" and "increasing impurity removal rate by 20%."
Customer cases: mention cooperating steel mills or typical application results (sensitive information must be redacted).

Environmental Protection and Safety

Environmental characteristics: smoke-free/low dust, no harmful elements (such as Na/K control), biodegradable (if applicable).
Operational safety: pre-melted type reduces splashing, or low moisture

Instructions for use

Addition method: spreading thickness (e.g., 20–30 mm), timing (e.g., immediately after steel pouring).
Compatibility: synergy with other refractory materials or refining slag.

Service Support

Customization capabilities: Adjust composition based on steel type, temperature, etc.
Supply chain assurance: Stable supply, technical support, etc.

 

 

 

 
 
product key technologies
2
01.

High-efficiency purification of molten steel
Key technologies:.

Alkaline design (CaO/SiO₂ = 1.2–1.8): Reacts with Al₂O₃ inclusions to form 12CaO·7Al₂O₃ (low-melting-point phase) Microporous adsorption: Active components with a specific surface area ≥ 5 m²/g (e.g., CaAl₂O₃) capture minute inclusions for quantitative effects
Inclusion removal rate >50% (traditional products: 30–40%)
Typical steel grade T[O] content reduced from 25 ppm to 12 ppm

02.

Long-lasting anti-oxidation protection
Innovative design:

Self-sealing slag layer: After melting, it forms a liquid film with a viscosity of 0.2–0.5 Pa·s, achieving an oxygen barrier efficiency of >90%. Composite antioxidant: Adding 2–3% metal Al powder, which reacts preferentially with [0] to form AlO: Protective layer Test data:
During the casting process, the ammonia content in molten steel is ≤3 ppm (traditional covering agents: 8–12 ppm)
Alloy element recovery rate improved by 2–5% (e.g., Si, Mn)

5

 

 

 

 

Send Inquiry

whatsapp

Phone

E-mail

Inquiry