The use of building stone production of building products are mainly:
① paper gypsum board. Add a small amount of adhesive, fiber, foam agent, etc. into the building gypsum and mix it with water, and then pour it continuously between the two layers of protective paper, and then roll, solidify, cut and dry it. Plate thickness 9-25 mm, dry bulk weight 750-850 kg/m 3, the plate toughness is good, non-combustible, stable size, smooth surface, can be sawn, easy to construction. Mainly used for internal partition wall, internal wall veneer, ceiling, sound absorption board, etc., but poor water resistance, should not be used in humid environment.
② Fiber gypsum board. The building stone slurry mixed with fiber and other admixtures is formed by winding, pressing and filtering or rolling, and then cut, solidified and dried. The thickness is generally 8 to 12 mm, and the paper stone has a plate ratio, its bending strength is higher, without protective paper and adhesives, but the bulk weight is larger, and the use of the paper stone has the same plate.
③ Decorative drywall. The construction gypsum slurry is poured into a mold frame with a pattern on the bottom mold. It is smoothed, solidified, demoulded and dried. The plate thickness is about 10 mm. In order to improve its sound absorption effect, it can also be made into panels with perforations and blind holes, which are commonly used as ceilings and decorative walls.
④ Gypsum hollow slats and gypsum blocks. The building gypsum slurry was poured into the mold, then the mold was removed and dried after vibration molding and solidification. The thickness of the hollow strip is generally 60~100 mm, and the hole rate is 30-40%. The block size is generally 600x600 mm, the thickness is 60-100 mm, the periphery is toned, and sometimes it can be made into hollow blocks with round holes. Hollow slab and block are made of special gypsum masonry, convenient construction, commonly used as non-load-bearing internal partition wall.





