Ferro Silicon 75
Chemical formula: FeSi75
Main uses: Inoculant, deoxidiser, alloy additive
Products Description
Ferro silicon 75 is a ferro silicon alloy with a silicon content of approximately 75 per cent and is one of the most common grades. It is commonly used in steel smelting to increase the strength and hardness of steel. In addition to this, it is a core raw material for industries such as steel, foundry, and magnesium metal. The main forms of ferro silicon 75 include powder, pellets, standardised lumps and natural lumps, each of which varies in size and use.
Product Parameter
| Element | Content range | Remarks |
|
Si |
72%~80% |
Core component, determines alloy properties |
|
Fe |
About 15%~25% |
Basic elements, alloying with silicon |
|
C |
≤0.2% |
Impurities need to be strictly limited |
|
Al |
≤1.5% |
Aluminium content affects alloy properties |
|
P |
≤0.04% |
Excessive phosphorus reduces steel toughness |
|
S |
≤0.02% |
Sulphur tends to cause thermal embrittlement |
Our Factory
Ferrosilicon 75 production process
Raw material preparation
The main raw materials for Ferrosilicon 75 are silica, coke and steel chips. Of these, silica is the main source of silicon, coke provides the heat needed for the reduction reaction, and steel scrap adjusts the composition of the alloy. The quality of the raw materials determines the purity and properties of the finished ferrosilicon product.
Batching and Mixing
The raw materials are mixed in precise proportions, checking that the proportions are correct before mixing. This affects the silicon content and the proportions of other elements in the ferrosilicon, which in turn affects the properties of the product.
Smelting process
Ferrosilicon is smelted by the electric furnace method, in which silica is reduced to silicon by means of a high-temperature electric arc and reacts with coke and steel chips to produce ferrosilicon. When smelting, the temperature of smelting should be controlled, otherwise the product quality will be affected.
Refining and Desulphurisation
After smelting, the product is refined and desulphurised to remove impurities from the product. In particular, sulphur is removed, which reduces the properties of ferrosilicon.
Pouring and Cooling
The refined ferrosilicon liquid is poured into moulds to form solid ferrosilicon ingots. The cooling process should be fast, the speed of cooling will affect the crystal structure and properties.
Quality Inspection
The produced ferrosilicon needs to undergo strict quality testing, including silicon content, sulphur content, hardness, toughness and other items. Any unqualified products need to be reprocessed or scrapped to ensure the quality of the final product.
Why Choose Us?
- We provide comprehensive after-sales service and support to all our customers.
- Our state-of-the-art equipment and manufacturing processes allow us to produce Ferro Silicon products to the highest standards.
- We have a highly skilled team responsible for manufacturing and quality control of our Ferro Silicon products.
- The intimate after-sales service has been highly praised by partners and customers from all over the country.
- Our reputation for excellence is based on our focus on quality, consistency, and exceptional service.
- In order to win a larger share in the international market, we will go all out to make our Low Carbon Ferro Silicon more competitive.
- We constantly adapt to the needs of the market, give full play to our own advantages, speed up technological transformation, strengthen production management and stabilize Low Carbon Ferro Silicon quality.
Previous
Ferro Silicon CompositionNext
Ferrous SiliconYou Might Also Like
Send Inquiry







