Production Methods
The main production methods of ferromanganese are blast furnace method and electric furnace method.
Blast furnace method
- Raw material preparation: Manganese ore needs to be pre-treated through beneficiation, crushing and screening to ensure uniform particle size and low impurity content. Coke is used as the reducing agent, which requires high fixed carbon content and low ash and sulphur content.
- Smelting process: The prepared raw materials are added from the top of the blast furnace. Inside the blast furnace, coke combustion generates high temperature and carbon monoxide, which reduces manganese oxides in manganese ore to manganese metal. At the same time, limestone and other fluxes react with the impurities in the ore to form slag, which is separated from the iron in the furnace cylinder, and the iron is released periodically to obtain manganese ferroalloys after casting.
- Characteristics: The production of ferromanganese by the blast furnace method has the advantages of high production efficiency and low cost. However, the temperature and atmosphere in the blast furnace are difficult to control precisely, and the ferromanganese produced has a high carbon content.
Electric Furnace Method
- Raw material preparation: There are strict requirements on the purity and particle size of the raw material, and it is usually necessary to select manganese ores to improve the quality of manganese and reduce the content of impurities.
- Smelting process: The raw material is added into the electric furnace, and the high temperature is generated by electrode energisation, so that the material inside the furnace undergoes reduction reaction. The temperature and atmosphere inside the electric furnace can be precisely controlled by adjusting the current, voltage and slag composition, etc., which enables the production of ferromanganese with different carbon contents, such as high-carbon ferromanganese, medium-carbon ferromanganese and low-carbon ferromanganese.
- Characteristics: The electric furnace method produces high quality ferromanganese and can precisely control the composition and properties of the product, but it consumes a lot of electricity and the production cost is relatively high.
Production standard
1. Chemical composition: The content of manganese in ferromanganese is more than 65%, the content of silicon is less than 1.5%, the content of carbon is less than 7%, the content of sulphur is less than 0.04% and the content of phosphorus is less than 0.25%.
2. Appearance quality: Ferromanganese should be free of cracks, inclusions, pores and obvious sand holes, and the surface should be clean and smooth.
3. Mechanical properties: The mechanical properties of ferromanganese should be in accordance with the national standards or contract provisions. Usually its tensile strength is more than 600MPa and elongation is more than 10%.
4. Packaging and Transportation: Ferromanganese should be packed with appropriate packaging materials to prevent moisture, pollution and damage. During transport, care should be taken to prevent collision and extrusion to ensure that the product quality is not damaged.
If you would like more information about ferromanganese or are interested in purchasing it, you can email us at :wangwei@dedaoferrosilicon.com.



