Off-the-shelf Slag Remover

Slagging agent is used in casting to remove impurities in molten iron and molten steel. The specifications of slag removal agent are mainly 18-30 mesh, 30-50 mesh, 50-80 mesh. The slag removal agent is made of high quality perlite sand.

Send Inquiry

Product Introduction

Products Description

Composite slag removal agent: Slag removal agent is a new type of composite slag removal agent jointly developed by a number of national scientific research institutions for five years. Its product quality has been proved by actual use, and the product quality is at the leading level in the domestic industry, comparable to similar foreign imported products, and the price is far lower than imported products. Now with more than 3000 domestic enterprises and charge companies perennial supply and export abroad, its main raw materials for volcanic ash minerals, the main composition of silicate, through special processing ratio, mainly used in the casting process of molten iron, molten steel solution slag removal, heat preservation.

intro

►Method of use of slag remover

1, slag removal and slag blocking: efficient slag removal agent can be used in ladle, tundish, electric furnace. After being evenly dispersed on the surface of the molten liquid by manual or spray gun, a little agitation can be quickly gathered into a slag shell that is easily separated from the metal solution, and a pure solution can be obtained by removing the slag shell, avoiding slag inclusion and improving the quality of the casting. And do not explode, do not splash, do not stick to the bag, do not hang on the wall.
2, thermal insulation covering: high efficiency slag removal agent has low thermal conductivity, forming a good insulation layer on the surface of the metal melt can reduce the heat loss of the solution. This is an excellent thermal insulation covering agent for intermediate subcontracting or metal solution that needs to be parked for a long time.
3, environmental protection: high efficiency slagging agent to metal melt no pollution, no penetration, does not affect its chemical composition and casting mechanical properties. No smoke, no dust and harmful gas pollution, can purify the environment, civilized production.
4, dosage: The amount of high efficiency slag agent is generally 1-3kg/T metal solution, which can be increased or decreased according to the size of the molten area, the temperature, and the impurity content of the melted metal.

f56c5a85b8b80f3d0e0c4bbe9d164f7