Calcium Silicon Block

Calcium Silicon Block

Calcium silicon block serves as a metallurgical additive in steelmaking and casting, functioning as a composite deoxidizer to enhance molten iron fluidity and improve iron leveling properties.
Send Inquiry
Product Introduction

Products Description

 

modular-1

Our silicon-calcium blocks are produced through precise smelting of silica and premium limestone in high-temperature electric furnaces. The standard composition is consistently maintained within the optimal range of 30-33% calcium (Ca) and 55-65% silicon (Si). This ratio, validated through extensive practical application, enables phased and highly efficient reactions within molten steel.

Product Advantages


1. Excess oxygen and sulfur in steel are the primary causes of cracking, embrittlement, and reduced corrosion resistance. Our calcium-silicon blocks, with their highly reactive calcium content, simultaneously capture oxygen and sulfur deeply, forming low-melting-point composite inclusions that float to the slag. This not only significantly enhances molten steel purity but also effectively controls sulfide morphology, substantially improving steel's transverse toughness, fatigue resistance, and machinability-particularly critical for pipeline steels and high-end structural steels.

 

2. Nozzle clogging during continuous casting often stems from the accumulation of high-melting-point inclusions like Al₂O₃. Adding our calcium silicate blocks allows calcium to effectively modify these inclusions, facilitating their aggregation and flotation. You will noticeably experience improved molten steel fluidity, significantly reduced risk of nozzle scaling, extended continuous casting runs, and more stable and reliable surface and internal quality of cast slabs.

 

3. We have moved beyond simple crushed materials, adopting hydraulic compression molding. Our dense, block-shaped products offer the following advantages:

  • High density: Strong penetration upon impact allows effective reaction deep within the molten steel, minimizing calcium loss to slag layers and air while improving recovery rates.
  • Low pulverization rate: Minimal dust generation during transportation and handling from our facility to your workshop ensures consistent composition, reducing fumes and waste during addition.
  • Flexible sizing: We provide optimal block dimensions tailored to your ladle capacity, addition equipment, and process preferences, enabling uniform and controllable addition.

 

Application Guidelines

 

Our calcium silicate blocks are widely used in:

  • Final deoxidation and inclusion modification in ladle refining furnaces (LF furnaces).
  • Calcium treatment processes for specialty steel production (e.g., bearing steel, gear steel, cord steel).
  • Final purification and fluidity improvement of molten steel prior to continuous casting.

 

Dosage: Based on steel grade and target sulfur/oxygen content, the recommended dosage is typically 0.5–2.0 kg per ton of steel. Optimal dosage can be determined through process trials, and our technical team can provide initial application recommendations.

 

Contact now

 

 

Send Inquiry

whatsapp

Phone

E-mail

Inquiry